Carbon fiber is the latest material choice for drag racing and muscle cars. You can often find lighter materials that are stronger than traditional steel, but you have to be careful when stripping them down because there’s no way of knowing what kind of chemical treatments have been done on the fibers.

What is a custom driveshaft?

A driveshaft is a part that rotates on the output shaft of a powertrain, transmitting torque between the engine and driveline. The term can be used as an interchangeable synonym for transmission but in this sense it usually describes a component of an automobile that converts rotational motion from the rotating output member (the “input” member) to different types of linear motion, such as drive chain transmission.

The rear damper assembly offers high road way noise insulation for enhanced sound quality and improved engine life A custom driveshaft is a weight added to the back of the car that transfers torque from the crank and engine to the wheels, but humans still have to provide braking control. A driveshaft can be an aftermarket component that manufacturers do not make readily available or a one made specifically for your car.

Benefits of Installing a Custom Driveshaft

Custom carbon fiber driveshaft are a must-have for those who use their car daily. It allows the driver to have a smoother driving experience and it will last much longer than any other type of conventional driveshaft. Those who choose this option will save money in the long run because they won’t have to replace it as often. It’s easy to damage a winch due to rocks that hang around the bottom.

Custom carbon fiber driven shafts are designed for increased strength and safety. This means much less work for you in eliminating the drive line wraps associated with winch mounting points. A custom driveshaft is one that is designed as per your specific vehicle, just to ensure the perfect fit. This makes it more durable and safe. For only a few hundred dollars, this was the best decision I have ever made.

The replacement driveshaft that I bought looked exactly like my old one and even had the wire loom already attached to it that had been in place for a couple of years now. After closer inspection I found that the crankshaft clamping force must have been drastically reduced because the drive shaft slid right into place with zero effort! Getting a custom driveshaft is always an option for you if you are planning on upgrading your vehicle.

These custom beauty choices will ensure your car will never break down and allow you the freedom of steering properly when driving at all times. With modifications like these, over time the price hurt by the fuel economy gains will decrease and it can only benefit your regular day-to-day life in your performance car.

How to Install a Custom Driveshaft

If you have a Nissan or Infiniti with an automatic transmission and a carbon fiber style driveshaft on the car you want to run, chances are your driveshaft will not fit and bolt up properly. This is when that enormous frustration sets in. You’re trying to save money and I know it feels like you tried everything but all your efforts are in vain when your car won’t start or move because of this small flat piece of metal. That is a headache!

Sometimes, people are bound and determined to completely change the appearance of their vehicle. It can be enlightening to take on a custom-built project, but not everybody has the skills, knowledge, or time to complete an aesthetic mechanic’s masterpiece like you can. We’ve compiled a comprehensive guide that will help make your project manageable and cost-effective.

What are the Different Types of Carbon Fiber Driveshafts

There are several different types and strengths of carbon fiber. There are a few common choices:

  • Epoxy-reinforced carbon fiber is the most inexpensive type with the least strength.
  • Carbon Fiber Reinforced Silicon Carbide is typically used in 4×4 scale robots.
  • Carbon Fiber Reinforced Epoxy Rod is needed for applications that require the highest level of strength.

Carbon fiber driveshaft upgrade contains many advantages, so it is important to determine what type of carbon fiber driveshaft you need. There are four different types of carbon fiber shafts that companies produce: single-forgings, mixed-forgings, graphite/epoxy mixes and gas-spring for carpentry. Most custom driveshafts use mixed forging because it allows for improved material properties and lighter weight.

Which type will work best for me?

Choosing a carbon fiber driveshaft is not as simple as you may think. There are many types and even more opinions on which is the best. There are a few basic processes to consider when you try to decide which type of fits your needs.

One of the first options that you should consider when thinking about getting your car’s driveshaft updated is the type of drive you’ll want for your custom carbon fab. Because both titanium and stainless steel come in many sizes and weights, it can be difficult to see how a particular custom carbon fiber fabricator will take care of you delivery; these companies also use special techniques to ensure a proper-fit shaft over long-distance driving commitments that may require parts exchanges on occasion.

Ultimate Car Audio Guide: Custom Driveshafts

A car audio guide has all the answers to a car’s performance. It tells you whether to go with an infinite baffle, elliptical, or dropped-v series X pipe trick. But in the world of custom driveshafts and drivetrains, there is no one single answer. Likewise, from engine swap to building your dream car, this guide is just for you.

Regardless of a vehicle’s manufacturer, major upgrade parts are required for most cars to reach their maximum potential. The Custom Driveshaft is essentially a part that can be added on the car and to increase power, design, styling and performance. It is not different from the rest of the actual driveshaft when it comes to durability and reliability but other than that it does not have any drawbacks as far as functionality goes.

Taylor Gilbert is the admin and freelance writer at How About Tech since 2020. He primarily writes Tech articles, How-to guides and Entertainment as well.